FABRICATIONS
Velvet
- 100% polyester
- Two-way velvet
- 30,000 rub test
- Water and stain-resistant
Danish wool
- 100% New Zealand wool
- 50,000 Rub Test
- 8oz/lin.yd-800g/lm
- Pilling-4
- Color fastness to light 5-7
- Color Fastness to rubbing 4-5
- No fire retardant chemicals
- Regular gentle cleaning helps preserve fabric color and appearance
Faux leather
- 100% polyurethane
- Thickness of 1.1mm
- Soft natural Napa leather hand-feel
- Fine grain appearance
- 100% polyester backing with suede-like texture
- Scratch resistant
Aniline leather
- Dyed all the way through the leather with soluble dyes
- Retains the leather’s natural appearance
- Supple and soft hand feel
- Very fine grain appearance
- No use of topcoat paint or insoluble pigmented sealant
- Average thickness of 2mm
Faux marble
- Solid MDF core with unsaturated polyester resin varnish and Japanese paper print
- MDF is California Phase2
- SGS tested for resistance to dry heat – 4
- SGS tested for resistance to staining (coffee and wine) – 5
- SGS tested for resistance to liquids – 5
- Coffee and side tables are composed of ¾”/19mm panels with mitered edges
- Beveled edge table tops are ”1/2.25cm thick with ¾”/19mm platform for strength and assembly
- Waterfall Table edges are 3”/7.6cm
- Available in three marble finishes but custom finishes can be ordered-minimum quantities apply
Real marble
- All Marble is treated with an impregnator to protect the surface
- Used only for marble bases for lamps-not recommended for commercial tables tops
- Semi-honed finish
- Anti-slip felt under bottom of bases to protect surfaces.
- Cararra and Nero Marquina sourced from Italy.
Solid wood
- Turned wood or hand-lathed legs for chairs or sofas in solid European beech
- Available in three stain; black, walnut or ash (natural)
Wood Veneer
- American walnut or Ash in Natural or stained black finish
- Solid MDF core
- MDF is California Phase2
- Beveled edge table tops are 2.25cm thick with ¾” / 19mm platform for strength and assembly
- Sealed with a water based Polyurethane
Printed Velvet
- 100% polyester
- 57” / 145cm width
- Two-way velvet
- 30,000 rub test
- Water and stain-resistant
- Digital sublimation printing for extreme high quality detail and resolution
Concrete
- Solid MDF core with hand applied 2mm concrete surface
- MDF is California Phase2
- Available in three colors
Powder Coated stainless Steel
- Available in black and white
- Custom colors available-minimum quantities apply
- Semi-matte finishing with minimal texture
- No solvents used in production so no VOC are emitted
- Thicker coating than traditional painting
Lamp Shade Material
- Black and white are Cotton/Linen material lined with pressure sensitive styrene.
- Cotton-Linen has a visible texture
- Gold and Silver is made from Mylar polyester film
- Mylar has a reflective, mirror-like quality
- Mylar film is semi-transparent
Glass
- We use tempered glass only
- Available in opaque or transparent finishes
- Thickness depend on specific item of furniture-please see individual spec sheets for details
Plated Carbon Steel
- Used for lighting fixtures only
- Metallic finishes gold and silver are a semi-reflective surface
- Black and white are semi matte finishes
- Inhibits corrosion
Stainless steel
- We use 201 stainless steel due to 50% higher yield strength than the 300 series
- Corrosion resistant for indoor settings
- Polished finish stainless steel is the natural color with no surface coating
- Polished stainless steel can be re-polished with a grinders and polisher to remove surface scratches
- Gold and Rose Gold are plated
- Gold and Rose Gold are treated with a protective coating to prevent color removal by acidic element
- Available in polishes, brushed and mixed polished/brushed surface treatments
UV-Quick Dry Outdoor Fabric
- 100% solution dyed acrylic twill
- Water and stain-resistant
- UV resistant to fading and color change
- Material is fungus and mildrew resistant-however mildew can form if dirt and stains are not cleaned from the surface
- Extremely durable and resistant to shrinking and wrinkling
UV Mesh
- Vinyl coated polyester yarn
- Water and stain-resistant
- Flame retardant
- UV resistant to fading and color change
- Extremely durable and resistant to shrinking
- Can be scrubbed, hosed or bleached with no damage to the material or loss of color
Wicker
- All weather wicker made from polyethylene
- Hand-woven onto an outdoor aluminum frame
- Lightweight and easy to move
- UV resistant to fading and color change
- Resistant to stretching and sagging
- Resistant to extreme high temperature of up to 230F or 110C
- Can be left outdoor during winter
Jacquard Patterns
- 100% polyester
- Woven patterns with raised texture
- Tightly woven patterns for extra durability
Slub Linen
- 100% polyester
- Woven with yarns of various thicknesses for texture
- Fabric is a heather composition with various tones of one shade
Uncut Chenille
- 100% polyester
- Very soft hand feel from the cut yarns
- Fabric is a heather composition with various tones of one shade
- The various fabric tones give the fabric a checkered appearance
Laminated Suede
- 100% polyester
- Faux micro-suede appearance
- Coated with a stain resistant treatment
- Fabric backed for extra durability
- 1mm thick
Outdoor aluminum
- 100% aluminum
- Rust and moisture proof
- Light-weight and easy to move
- UV paint powder coated to protect against fading
Powder coated/Enamel painted steel
- 100% steel
- Used for the lamps and Bauhaus tables
- Very strong and durable
Aluminum
- 100% aluminum
- Rust and moisture proof
- Light-weight and easy to move
- All colors (including metallics) are powder-coated for durability